Building a Wooden Camera

One of the pleasures of living in a state of semi-retirement is having time to indulge in inessential but absorbing activities. This Summer's main time-absorber was building a wooden camera – still not quite complete, but well advanced on the state it was in when this picture was taken.

The project was mostly inspired by my students' enthusiasm for alternative and experimental ways of making photographs. Although they like their digital cameras, they also love doing practical things that involve physically interacting with materials. There is a tangible and tactile satisfaction in making things by hand that isn't gained through working solely with digital processes.

It's a subject that came into focus for me last year after reading Matthew Crawford's The Case for Working with Your Hands, which I blogged about at the time. At around the same time I was asked to teach practical and experimental course units that gave a wide scope for investigating the creative potential of alternative processes. We did a lot of experimental work with large format cameras, using improvised lenses and a variety of negative materials; we also worked with pinhole cameras and alternative print processes, particularly salt printing and cyanotypes. It was during this time I came across, quite by chance – or rather, by Amazon's predictive algorithms – an intriguing-looking book, Primitive Photography: A Guide to Making Cameras, Lenses and Calotypes, by Alan Greene.

 

While Matthew Crawford discusses the value of practical activity, Alan Greene gets straight down into hard-headed practical instruction. It is a book that inspires, but offers no shortcuts to the challenges it sets the reader. The only reward it offers is the opportunity to take photographs as eerily beautiful as those taken by the author himself. It is certainly not a book for a faint-hearted reader, as the densely-expressed instructions require a force of will to follow. The chapter on building a camera makes no allowances for improvisation, error or diversion, it is a matter of following the instructions exactly, step by step, not ever being quite sure which bit of the camera you're making, but with the satisfaction of seeing it gradually take shape in front of you.

Having said that, a UK-based reader like myself has to perform some mental gymnastics to turn the USA-orientated instructions into action. While our two nations are famously divided by a common language, we are also divided by different standard systems of measurement and by a variation in the materials that are readily available. Greene makes extensive use of basswood for example, a scarce and unreasonably expensive material here. Being determined myself to follow the underlying philosophy of the book, which is make the camera out of commonly available materials, I decided to use the nearest equivalents I could find in my local DIY stores, B&Q and Homebase.

The framing is made out of pine stripwood with the nearest metric cross-section measurements. It comes in 2.4m (9ft) lengths and is very cheap. Instead of Luan, I used 6mm exterior-grade plywood. A model aircraft shop was able to supply me with a more expensive 4mm light plywood which I'm using for darkslides.

The cumulative effect of these differences in imperial and metric dimensions has a knock-on effect on later stages of the build. For example, my negative holder, built up out of seven laminated layers of stripwood, is 4mm thicker than the author's example in the book. This necessitated me cutting out and replacing parts of the camera's internal framework that I'd innocently cut to the sizes given in the plans. Suffice to say, my copy of the book has been heavily annotated with points to note for future builds.

This has been a book and a project that I would recommend to anyone. Building the camera has been an instructive and satisfying experience that should provide lots of further fun, building lenses and recreating those early negative processes.